Whiskey Creek ready mix concrete delivery and pumping

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your FLORIDA home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right top concrete contractors contractor in FLORIDA .

Steps To Finding The Right Concrete Contractor in FLORIDA

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the top concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in FLORIDA .


cornerstone retaining wall

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for top concrete contractors in FLORIDA . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

local ready mix concrete

The 2nd step is hire a knowledgeable masonry contractor in FLORIDA . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete floor companies

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in FLORIDA .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

How To Choose Concrete Contractors

concrete driveway installation

The most frequent phone call I receive out of the phone book usually goes something like this, "Hi, I have a back patio that I wanted to stain and I went up to __________(fill in the blank with one of your local chain home improvement stores) to pick up some "concrete stain" and now it's flaking off. Is there something I can do to stop the flaking?"

Some customers have even gone to the extent of contacting the company to complain about the product and most of the companies will send a "stripper" and more product to re apply. I am not here to trash those companies, but to explain the very important difference between an ACID stain and a concrete stain. An acid Stain is a chemical reaction. Any other generic stain (that I've seen) from your home improvement chains are coatings.

So, I'll usually take a drive out to the home of the disgruntled caller. I'll measure up the patio and give a quote on how much it will cost to grind the coating completely off and acid stain the new canvas. That's usually the last time I talk to them, because what started as a project that would have cost no more than a few hundred dollars and a weekend, turns into a labor intensive, relatively costly, fix. However; the result from staining a freshly ground surface, is beautiful. The aggregate in the concrete becomes slightly exposed, leaving a terrazzo like finish.

STAIN DID NOT REACT. Since Acid Staining is a chemical reaction, anything in the pores of the concrete or on the surface will either block the stain from reacting completely, or change the reaction. Often people pull up there carpet, do a little floor sanding, and stain. This is fine if you like the result, but some people hate it. Paint,carpet glue, chemical spills, and other things on the concrete, never completely go away unless you grind them down...or you can overlay, and that is another article at another time. I would give the same advice for finding an overlay as I would an acid stain. Stay away from generic resurface products.

If the stain did not take at all anywhere, there is probably a cure and seal product on the concrete. You'll have to strip it or grind it or overlay... If it is an outside slab, chances are it has just been suspect to the elements for too long. Often the pores are clogged with dirt and the cream has worn off the top leaving small aggregate and sand exposed. Sand will not stain. The result achieved through staining a slab in this condition would be the same result as if you hosed it down. Same advice here, grind down or, if it's not cracked and shifting, find a good over-lay. Then start over.

Concrete Foundations And Construction Companies For Erecting Buildings

pouring concrete driveway

Concrete scanning service is deemed as a dependable and non- harmful method of detecting targets inside concrete structures.
This is ideally performed before drilling, cutting or mechanical coring functions. This procedure is important to avoid serious effects on current facility infrastructure, concrete cutting equipment, as well as worker wellbeing and safety.

This state-of-the-art process produces multiple benefits such as the following:
  • It can track down conduits, reinforcing bars, tension cable systems, and PVC (Polyvinyl) pipes.
  • Concrete scanning service is also a way of averting radiant floor heating.
  • This ascertains thickness of concrete slabs and can be applied on floors, walls, ceilings, columns, and rafters.
  • It provides for a quick and correct inspection results which can also be obtained on the same day that the test was conducted.
    GeoScan Utility & Structural Investigation boasts of concrete scanning service that utilizes high-tech systems such as Ground Penetrating Radar or GPR.
    This is a national and industry-accredited firm based in Victoria that makes available a variety of services such as structural, underground utility and geophysical investigation.
    The commitment of GEO Scan is to provide clients with state-of-the-art technology, equipment and knowledge. The enterprise also specialises in locating cables, underground pipes and cable faults.
    Using Ground Penetrating Radar can also gauge concrete depth and trace cavities in sink holes (natural depression) beneath the earth surface.
GeoScan: Utility and Structural Investigation

As part of the concrete scanning service, GPR employs the most recent ground penetrating know-how and provides essential information about utilities, concrete and other probable glitches inside existing structures.

This radar charts the position of secondary surface barriers directly into the surface.

It provides contractors with a comprehensible indication of safe places to make a hole, cut, or dig and where additional precaution is needed. The technique is proven secure and cost-effective.
GPR equipment is a form of non-destructive examination. This form of radar detection in concrete scanning service from GEO Scan Utility & Structural Investigation enables you to inspect the job site without any interference.
Moreover, it facilitates the preservation of structures and avoidance of task downtime.

It also leads to cost reduction because the GPR can eliminate the possibilities of costly job downtime or stumbling blocks arising from potential structure damage, facility closure due to detached utility lines, or injuries to workers.
The cost of this radar is fairly negligible compared to the actual project value as well as cost of mishaps, structural impairment, or injuries.
You do not have to worry about risks because the as Ground Penetrating Radar does not produce radiation while the job site is being scanned.

It protects not only the workers but residents of adjacent communities as well. GPRS technology does not deliver any radiation as we scan your job site.
There is quality assurance from GEO Scan Utility & Structural Investigation. It will assist you in keeping track of issues like built as designed in existing structures.
The technology will find out if concrete slabs or weep walls were built as specified and if reinforcing bars were placed based on the appropriate design plan.

Overall, this sophisticated equipment in concrete scanning service is a useful implement.

FLORIDA biggest concrete companies