Mineral Bluff concrete supply inc

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your GEORGIA home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right decorative concrete contractors contractor in GEORGIA .

Steps To Finding The Right Concrete Contractor in GEORGIA

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the decorative concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in GEORGIA .


concrete flooring companies

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for decorative concrete contractors in GEORGIA . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

concrete driveway companies

The 2nd step is hire a knowledgeable masonry contractor in GEORGIA . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

concrete slab foundation

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in GEORGIA .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

What Does a Concrete Contractor Do?

concrete driveway companies

Geothermal / Radient Heat

Snow and ice covered driveways and walks have been plaguing man for many winters now. we have created tools and machines to assist us in our efforts of snow removal, but they still require bundling up and facing the cold. Would it not be wonderful to watch the snow melt away as it lands on your walk, no matter what the current weather conditions? I think I have formulated a solution to achieve this kind of winter wonderland.

To get started we will be discussing to types of heating systems; geothermal and in floor radiate heat. Then we will combine them as one and use them in a different way then normal, let us begin.

Geothermal Heat pump / Ground Source Heat

A ground source heat is an alternative energy heating and cooling system that uses the natural heat of the earth to heat and cool our homes. The concept is simple, below the frost line the ground maintains a constant 65 degrees F. Water or a water antifreeze mix is circulated in pipes that are buried below the frost line or deeper, they are connected to heat exchanging unit in the home where the heat from the earth that has been transferred to the water is used to warm the home. In some cases the water may be heated by other means ( lp, natural gas, electric)once in reaches the exchanging unit. This is actually an efficient way to heat your home, due to the fact that you are only heating the water from its already warm 65 degrees.

In Floor Radiant Heat

In Floor Radiant heating is a heating system which uses heat conduction to warm the floor then the heat rises and warms the room. Most commonly these systems consists heating and circulating warm water in a closed system of pipes. Similar to our previously discussed ground source heat, water is used as the medium for heat transfer. I believe that a combination of these system has been used before for in home heat, but we are talking about warming our walks to melt snow.

Now on to the system.

Snowless Sidewalk

Now to the topic at hand, there may be a system that does warm the walks and melt the snow as it falls but what I am purposing here is a system that uses little to no additional energy. Combining these to effcient heating systems to create a warm, snow resist, shovel free walkway is easy. Frist we aquire some tubing like that used in the ground source system and that used in the radient floor system and design a system of circulation. Then using the figure below as a guide we will need to bury some of it below the frost line and lay some in the poured concrete of our walks and ways. This will need to be done at the time the walk and driveways are poured or the exsisting will need to be destoyed and replaced, unless you can figure out a way to lay the tubing under your exsisting walkways without damaging it (if you do let us know). I will guess that a 4 to 1 ratio of tubing will be sufficent to accomplish our goal. This means we will bury 4 foot of tubing for every 1 foot in the walkway. We will also need a pump to circulate the water and a few valves for maintenance access and system bleed. I suggest laying the tubing in a zig zag pattern with about 8-10inch gap between lines, see figure for illustration. Now our goal is to keep the walk way surface above freezing which is 32 degrees F, so if the water from the earth is 65 degrees then there should be no need for additional heat. With that in mind the only energy require to run our system is a small amount of electrical for the circulating pump. Any small electrical pump will work just fine. For complete efficiency I suggest a small DC pump and small solar panel kit and battery to run it, this can provide circulation at no additional cost. Now you can sip your coffee while standing in the window watching your neighbors shoveling their walks in the freezeing cold.

This hub it not very detailed or specific and the contents are purely speculative and theoretical. This design has not been proven or tested in anyway. I in no way claim to be an expert in the areas I am about to discuss. I also take no responsibility of damages or expenses cause by the implementation of these ideas. I recommend researching the two heat systems mentioned before attempting to build a system like this. I also recommend professional asssistence in any DIY project.

With all that said I am greatly interested in comments and discussion from expert individuals who have or are willing to experiment with the following idea.

Thanks for reading, I look forward to your comments.

Concrete Foundations And Construction Companies For Erecting Buildings

concrete slab foundation

Concrete formwork is the use of support structures and moulds to create structures out of concrete which is poured into the moulds.

There are many different types of formwork used in construction, usually differing according to what the building requirements and challenges are. Formwork is used by creating moulds out of wood, steel, aluminium or prefabricated forms into which the concrete is poured. This is then allowed to harden and set after which it is stripped, or in the case of stay-in-place formwork it is left as part of the structure.

Formwork allows contractors to cast and construct the main parts of a building which are required to be strong and support the structure such as floors and walls, as well as smaller parts of a building such as stairs relatively quickly.

Types of Formwork
There are many different types of concrete formwork used in construction. Traditional timber formwork uses timber and plywood to form the moulds for pouring. This method is cheaper than other methods, yet not as effective because wood is not as strong as metal or steel. However, on complicated sections of buildings which need great attention to detail, timber formwork is still widely used.

Concrete can crack, which was problematic for constructions throughout history as they ran the risk of collapse. Today reinforced concrete is used which is a much stronger substance and rarely cracks. When concrete is reinforced, it is filled with metal rods and reinforcing bars with other materials such as glass and plastic fibre.

Concrete formwork is widely used in present day construction. With the many different types of formwork available, any building project is more easily achievable because different methods can be used to achieve the desired result. When reinforced, concrete is a virtually indestructible material, perfect for major construction work, as well as small, detailed and complex structures.

GEORGIA licensed concrete contractors