Mountain Park american concrete company

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your GEORGIA home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete contractors delaware contractor in GEORGIA .

Steps To Finding The Right Concrete Contractor in GEORGIA

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete contractors delaware contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in GEORGIA .


remix concrete

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete contractors delaware in GEORGIA . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

poured concrete wall construction

The 2nd step is hire a knowledgeable masonry contractor in GEORGIA . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

decorative concrete business

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in GEORGIA .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

How to Do Your Own Low-Cost Natural Stone Floor

concrete contractor services

The most frequent phone call I receive out of the phone book usually goes something like this, "Hi, I have a back patio that I wanted to stain and I went up to __________(fill in the blank with one of your local chain home improvement stores) to pick up some "concrete stain" and now it's flaking off. Is there something I can do to stop the flaking?"

Some customers have even gone to the extent of contacting the company to complain about the product and most of the companies will send a "stripper" and more product to re apply. I am not here to trash those companies, but to explain the very important difference between an ACID stain and a concrete stain. An acid Stain is a chemical reaction. Any other generic stain (that I've seen) from your home improvement chains are coatings.

So, I'll usually take a drive out to the home of the disgruntled caller. I'll measure up the patio and give a quote on how much it will cost to grind the coating completely off and acid stain the new canvas. That's usually the last time I talk to them, because what started as a project that would have cost no more than a few hundred dollars and a weekend, turns into a labor intensive, relatively costly, fix. However; the result from staining a freshly ground surface, is beautiful. The aggregate in the concrete becomes slightly exposed, leaving a terrazzo like finish.

STAIN DID NOT REACT. Since Acid Staining is a chemical reaction, anything in the pores of the concrete or on the surface will either block the stain from reacting completely, or change the reaction. Often people pull up there carpet, do a little floor sanding, and stain. This is fine if you like the result, but some people hate it. Paint,carpet glue, chemical spills, and other things on the concrete, never completely go away unless you grind them down...or you can overlay, and that is another article at another time. I would give the same advice for finding an overlay as I would an acid stain. Stay away from generic resurface products.

If the stain did not take at all anywhere, there is probably a cure and seal product on the concrete. You'll have to strip it or grind it or overlay... If it is an outside slab, chances are it has just been suspect to the elements for too long. Often the pores are clogged with dirt and the cream has worn off the top leaving small aggregate and sand exposed. Sand will not stain. The result achieved through staining a slab in this condition would be the same result as if you hosed it down. Same advice here, grind down or, if it's not cracked and shifting, find a good over-lay. Then start over.

Professional Concrete Scanning Services and GPR Equipment

concrete wall demolition

Concrete formwork is the use of support structures and moulds to create structures out of concrete which is poured into the moulds.

There are many different types of formwork used in construction, usually differing according to what the building requirements and challenges are. Formwork is used by creating moulds out of wood, steel, aluminium or prefabricated forms into which the concrete is poured. This is then allowed to harden and set after which it is stripped, or in the case of stay-in-place formwork it is left as part of the structure.

Formwork allows contractors to cast and construct the main parts of a building which are required to be strong and support the structure such as floors and walls, as well as smaller parts of a building such as stairs relatively quickly.

Types of Formwork
There are many different types of concrete formwork used in construction. Traditional timber formwork uses timber and plywood to form the moulds for pouring. This method is cheaper than other methods, yet not as effective because wood is not as strong as metal or steel. However, on complicated sections of buildings which need great attention to detail, timber formwork is still widely used.

Concrete can crack, which was problematic for constructions throughout history as they ran the risk of collapse. Today reinforced concrete is used which is a much stronger substance and rarely cracks. When concrete is reinforced, it is filled with metal rods and reinforcing bars with other materials such as glass and plastic fibre.

Concrete formwork is widely used in present day construction. With the many different types of formwork available, any building project is more easily achievable because different methods can be used to achieve the desired result. When reinforced, concrete is a virtually indestructible material, perfect for major construction work, as well as small, detailed and complex structures.

GEORGIA licensed concrete contractors